VSaero FRP TKYO v1 Wide Body Rear Bumper > Porsche Cayman 987.1 2006-2008(vsaero_108963)

(No reviews yet) Write a Review
Was: $325.00
Now: $221.00
SKU:
vsaero_108963
Type:
Exterior
Type:
Rear Bumpers and Lips
Availability:
In Stock
Location:
Las Vegas
Stock:
1
Notes:
Will NOT fit without the matching rear fender flares, this rear bumper is designed for the larger wheel well that the rear flare creates, this will not match a stock wheel well curvative and therefo... (see description)

Product Overview

NOTES: Will NOT fit without the matching rear fender flares, this rear bumper is designed for the larger wheel well that the rear flare creates, this will not match a stock wheel well curvative and therefore will not fit on a standard width Cayman. This part is designed for the early model 987.1 Cayman.

This is a TKYO v1 Wide Body Rear Bumper manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.

New: A brand-new VSaero VSaero FRP TKYO v1 Wide Body Rear Bumper > Porsche Cayman 987.1 2006-2008, in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass VSaero parts always require prep work before they can be primed and painted. This product vsaero_108963 is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. VSaero direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization, make sure to check with the installer. This product is designed for the Porsche Cayman 2006-2008.

Reviews

(No reviews yet) Write a Review