VSaero FRP GT3 RS Front Bumper 2pc > Porsche 911 997 2005-2012(vsaero_108430)

(No reviews yet) Write a Review
Was: $461.00
Now: $312.00
SKU:
vsaero_108430
Type:
Exterior
Stock:
0
Type:
Front Bumpers and Lips
Notes:
Note: This bumper is designed to use the early model 997.1 2005-2008 turn signal lights if you are installing this on a later model 2009-2011 997.2 you must use the early model turn signal lights fr... (see description)
Availability:
Out of Stock
Location:
-

Product Overview

NOTES: Note: This bumper is designed to use the early model 997.1 2005-2008 turn signal lights if you are installing this on a later model 2009-2011 997.2 you must use the early model turn signal lights from the 2005-2008. Upper grille opening near the hood is flush as you can see in the pictures.

This is a GT3 RS Front Bumper 2pc manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.

New: A brand-new VSaero VSaero FRP GT3 RS Front Bumper 2pc > Porsche 911 997 2005-2012, in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass VSaero parts always require prep work before they can be primed and painted. This product vsaero_108430 is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. VSaero direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization, make sure to check with the installer. This product is designed for the Porsche 911 2005-2012.

Reviews

(No reviews yet) Write a Review