ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 (modelodrive_120250)

(No reviews yet) Write a Review
MSRP: $350.00
Was: $350.00
Now: $238.00
(You save $112.00 )
SKU:
modelodrive_120250
Notes:
Requires an X6M rear bumper to fit properly.
Availability:
In Stock
Location:
Las Vegas, Nevada
Material:
FRP
Stock:
2
Category Type:
Exterior
Category Type:
Rear Bumpers or Lips
Material Info:
⚠️FIBERGLASS ➡ REQUIRES PREP WORK⚠️ SHIPS FROM USA


Product Overview

NOTES: Requires an X6M rear bumper to fit properly.

ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 (modelodrive_120250)

ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 1ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 2ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 3ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 4ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 5ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 6ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 7ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 8ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 9ModeloDrive FRP HAMA Rear Duct Hole Liners > BMW X6 E71 M 2008-2014 - Image 10

This is a HAMA Rear Duct Hole Liners manufactured or distributed by ModeloDrive with FRP being the primary exterior surface material. ModeloDrive FRP (fiberglass) parts are made to a higher standard than most mass produced US market fiberglass parts. Holes will not always be pre-drilled so you still will need to dry fit the parts before they can be prepped and finished. Due to the nature of fiberglass there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All ModeloDrive fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment but generally speaking less than the competition.




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews

(No reviews yet) Write a Review