VSaero FRP GT3-R Wide Body Rear Bumper > Porsche 911 996 1999-2004(vsaero_101503)

(No reviews yet) Write a Review
Was: $867.00
Now: $589.00
SKU:
vsaero_101503
Type:
Exterior
Stock:
0
Type:
Rear Bumpers and Lips
Notes:
This part is not designed to fit the Turbo 911. You can see this rear bulges out near the rear wheel arch in order to meet the VSaero GT3-R rear flare (not included). You must use this rear bumper ... (see description)
Availability:
Special order
Location:
-

Product Overview

NOTES: This part is not designed to fit the Turbo 911. You can see this rear bulges out near the rear wheel arch in order to meet the VSaero GT3-R rear flare (not included). You must use this rear bumper in conjunction with the rear flare so that it sits properly, otherwise you will notice the flared edges of the bumper sticking out.

This is a GT3-R Wide Body Rear Bumper manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.

New: A brand-new VSaero VSaero FRP GT3-R Wide Body Rear Bumper > Porsche 911 996 1999-2004, in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass VSaero parts always require prep work before they can be primed and painted. This product vsaero_101503 is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. VSaero direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization, make sure to check with the installer. This product is designed for the Porsche 911 1999-2004.

Reviews

(No reviews yet) Write a Review