ModeloDrive FRP RSAC Conversion Hood > Mazda Mazda Miata MX-5 NA 1990-1997(modelodrive_110697)

(No reviews yet) Write a Review
Was: $700.00
Now: $476.00
SKU:
modelodrive_110697
Type:
Exterior
Type:
Hoods
Availability:
In Stock
Location:
Las Vegas
Stock:
3
Notes:
Make sure you use Aerocatch latches or hood pins on this hood. This does not include headlights or bumper lights, you will need to source lights and custom wire / mount them.

Product Overview

NOTES: Make sure you use Aerocatch latches or hood pins on this hood. This does not include headlights or bumper lights, you will need to source lights and custom wire / mount them.

This is a RSAC Conversion Hood manufactured or distributed by ModeloDrive and primarily made of FRP material. ModeloDrive FRP (fiberglass) parts are made to a higher standard than most mass produced US market fiberglass parts. Holes will not always be pre-drilled so you still will need to dry fit the parts before they can be prepped and finished. Due to the nature of fiberglass there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All ModeloDrive fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment but generally speaking less than the competition.

New: A brand-new ModeloDrive ModeloDrive FRP RSAC Conversion Hood > Mazda Mazda Miata MX-5 NA 1990-1997, in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass ModeloDrive parts always require prep work before they can be primed and painted. This product modelodrive_110697 is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. ModeloDrive direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization, make sure to check with the installer. This product is designed for the Mazda Miata 1990-1997.

Reviews

(No reviews yet) Write a Review