ModeloDrive FRP OER Front Bumper > Toyota Supra (JZA80) 1993-1998 (modelodrive_120252)

(No reviews yet) Write a Review
Was: $700.00
Now: $476.00
SKU:
modelodrive_120252
Category Type:
Exterior
Category Type:
Front Bumpers or Lips
Availability:
Out of Stock
Location:
-
Material:
FRP
Stock:
0

Product Overview

ModeloDrive FRP OER Front Bumper > Toyota Supra (JZA80) 1993-1998 (modelodrive_120252)

ModeloDrive FRP OER Front Bumper > Toyota Supra (JZA80) 1993-1998 - Image 1ModeloDrive FRP OER Front Bumper > Toyota Supra (JZA80) 1993-1998 - Image 2ModeloDrive FRP OER Front Bumper > Toyota Supra (JZA80) 1993-1998 - Image 3ModeloDrive FRP OER Front Bumper > Toyota Supra (JZA80) 1993-1998 - Image 4

This is a OER Front Bumper manufactured or distributed by ModeloDrive with FRP being the primary exterior surface material. ModeloDrive FRP (fiberglass) parts are made to a higher standard than most mass produced US market fiberglass parts. Holes will not always be pre-drilled so you still will need to dry fit the parts before they can be prepped and finished. Due to the nature of fiberglass there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All ModeloDrive fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment but generally speaking less than the competition.




New: A brand-new ModeloDrive ModeloDrive FRP OER Front Bumper > Toyota Supra (JZA80) 1993-1998, in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass ModeloDrive parts always require prep work before they can be primed and painted. This product modelodrive_120252 is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. ModeloDrive direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization, make sure to check with the installer. This product is designed for the Toyota Supra 1993-1998.

Reviews

(No reviews yet) Write a Review