ModeloDrive FRP GT3 RS V2 Upper Wing Spoiler > Porsche 911 (996) 1999-2004 (modelodrive_120460)

(No reviews yet) Write a Review
MSRP: $1,500.00
Was: $1,500.00
Now: $1,020.00
(You save $480.00 )
SKU:
modelodrive_120460
Material Info:
⚠️FIBERGLASS ➡ REQUIRES PREP WORK⚠️ SHIPS FROM USA
Stock:
5
Category Type:
Exterior
Category Type:
Wings
Location:
Las Vegas, Nevada
Availability:
In Stock
Notes:
Will NOT fit the Turbo or 4S models. The style of this wing is inspired by the early 997 GT3 RS 4.0 but suited to fit the 996.
Material:
FRP


Product Overview

NOTES: Will NOT fit the Turbo or 4S models. The style of this wing is inspired by the early 997 GT3 RS 4.0 but suited to fit the 996.

ModeloDrive FRP GT3 RS V2 Upper Wing Spoiler > Porsche 911 (996) 1999-2004 (modelodrive_120460)

ModeloDrive FRP GT3 RS V2 Upper Wing Spoiler > Porsche 911 (996) 1999-2004 - Image 1ModeloDrive FRP GT3 RS V2 Upper Wing Spoiler > Porsche 911 (996) 1999-2004 - Image 2

This is a GT3 RS V2 Upper Wing Spoiler manufactured or distributed by ModeloDrive with FRP being the primary exterior surface material. ModeloDrive FRP (fiberglass) parts are made to a higher standard than most mass produced US market fiberglass parts. Holes will not always be pre-drilled so you still will need to dry fit the parts before they can be prepped and finished. Due to the nature of fiberglass there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All ModeloDrive fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment but generally speaking less than the competition.




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews

(No reviews yet) Write a Review