- Stock:
- 1
- Category Type:
- Exterior
- Category Type:
- Rear Bumpers or Lips
- Availability:
- In Stock
- Location:
- Las Vegas, Nevada
- Material:
- Carbon Fiber
ModeloDrive Carbon Fiber OER Rear Trunk Luggage Compartment Trim 2PC > Toyota MRS MR2 Spyder 2000-2005 (modelodrive_120477)
Additional Images:
Manufacturer's Notes:
This is a OER Rear Trunk Luggage Compartment Trim 2PC manufactured or distributed by ModeloDrive with Carbon Fiber being the primary exterior surface material. Most carbon fiber parts we sell are "wet" carbon fiber, this means they have that "wet" glossy look, the only exception to this is then the product specifically states "dry". Dry carbon is usually lighter than wet carbon but has a dull flat finish. When installing ModeloDrive Carbon Fiber parts make sure you are using hood pins on hoods and do not use hydraulic arms to prop open hoods and trunks as they can warp the light weight components over time. ModeloDrive Carbon fiber parts may require modifications such as: Drilling of holes / cutting / sanding / fixing cracks / buffing to eliminate scratches, etc. Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. Our Carbon Fiber parts are made with handlaid wetcarbon with plastic resin. Genuine show quality carbon reinforced with FRP fiberglass backing. Aeroparts are to be installed by a professional body shop. Bolts, screws, and double sided tape is not included. Carbon Fiber parts often have a fiberglass underside which may require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.
Material Information:
New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Carbon fiber parts are reinforced with a fiberglass backing for added strength. Carbon fiber parts still require prep work. You will need to preform taks such as: buffing, drilling holes (for winshield windshield water nozzles, etc), adding or removing fiberglass (mounting tabs, etc). Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. Carbon is a composite material and may exhibit more gap than OEM materials. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.
We understand you want your new parts as soon as possible! We work hard to process and ship orders usually within 1-2 business days.
Estimated Delivery Times
While we can't guarantee exact delivery dates, most domestic orders are delivered within 3-7 business days after shipment.
Shipping Costs
Shipping costs are calculated at checkout and depend on the weight and destination of your order. We offer combined shipping wherever possible. Offer will be calculated at checkout.
Tracking Your Order
Once your order ships, you'll receive an email with a tracking number that allows you to follow your package's progress. Large items must ship by a freight carrier, be sure to follow the instructions emailed.
For questions or concerns about your order, please feel free to contact us at (702) 900 2346 | (775) HI-BOOST
Disclaimer
All rear lips and add-ons offered by ModeloDrive are designed as aftermarket accessories intended for off-road and show use only. ModeloDrive assumes no responsibility for any damage or injury resulting from the use of these products. Due to the nature of fiberglass and the manufacturing process, ModeloDrive rear lips and add-ons are not ""direct bolt-on"" parts. Additional preparation, such as sanding, shaving, filling gaps, or custom bodywork, may be required. Installation may also involve modifications to vehicle components, such as adjusting the rear bumper or other features to ensure proper fitment of the new rear lip or add-on.
Certain rear lips and bumper add-ons may require fewer modifications compared to full rear bumper replacements, as they typically overlap the existing bumper cover or attach underneath it. This can reduce the need for significant vehicle alterations. While these products may offer a more straightforward installation process, ModeloDrive strongly recommends professional installation by a custom shop experienced in working with fiberglass body kits to ensure proper fitment and safety.
ModeloDrive rear lips and add-ons are designed strictly for off-road and show applications. Due to strict Department of Transportation (DOT) regulations, many of these products are not street legal. ModeloDrive does not endorse or recommend the use of rear lips or add-ons on public roads or highways.