The average front or rear bumper ships in a box measuring 79 x 23 x 41 inches and weighing about 20–30 lbs. Some vehicles, including certain SUVs, as well as more aggressive or oversized bumper styles, may require custom, larger boxes.

Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material; therefore, it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and perform body work before painting. Cutting and adding fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finished. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been involved in accidents and/or have body damage or customization.

Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material; therefore, it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and perform body work before painting. Cutting and adding fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finished. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been involved in accidents and/or have body damage or customization.

Aftermarket FRP and carbon fiber hoods require auxiliary hood pins because composite material expands, contracts, and flexes differently than OEM metal. Over time, this can shift latch alignment, and at highway speeds the reduced weight of a composite hood combined with aerodynamic lift creates upward force on the leading edge. Hood pins provide a mandatory secondary safety measure that eliminates the single point of failure.

Why Aerocatch? Aerocatch latches are the industry standard because they sit nearly flush with the hood surface — no protruding pin shafts. They use a spring-loaded, quarter-turn locking mechanism that clicks into a detented, closed position, giving both visual and tactile confirmation that the hood is secure. Unlike traditional hood pins, there is no separate R-clip or lanyard to lose, and the integrated assembly is available in finishes that blend cleanly into painted or carbon-fiber hoods. Originally proven in FIA-sanctioned racing series, they carry motorsport-grade reliability onto street-driven builds.

Hood pins are typically installed at the leading edge of the hood, approximately 6–8 inches inward from each headlight corner, with a solid backing plate on the underside. Never install through unsupported laminate. Professional paint and body shop installation is strongly recommended; mount all hardware before painting to ensure proper alignment and sealant application.